The Duress™ Flic allows you to activate an emergency without touching your phone. Before the Flic can be used, it needs to be paired to your mobile device.
Before you start
First, make sure you have all settings enabled for the Duress™ App. Go into your phone's settings and make sure the following settings are enabled for Duress™:
- Bluetooth on and enabled for Duress™
- Location on and enabled/set to "Always" for Duress™
- Microphone on and enabled for Duress™
- Camera on and enabled for Duress™
Your button is already switched on and has a range of 50 metres. It will stay turned on and send signals until the battery runs out. Your battery should last around around one year, depending on your usage.
Pairing your Flic
After ensuring that your settings are all enabled, you can begin your pairing process by opening the Duress™ App and logging in to your account.
1 - Open the Menu
Once you're in your Duress™ App, open your menu by tapping the hamburger menu icon in the top left corner (= three horizontal lines).
2 - Select Duress Devices
Once you have opened your menu, tap on Duress Devices.
3 - Select Duress Flic
Select the device you want to pair, in this case it's the Duress Flic.
4 - Pair your Duress Flic
A pairing screen will open up, this is where you can pair your Flic. Hold down on your Flic until a light flashes to send out a pairing signal to your phone.
5 - Choose a name
Once your phone has found your Flic, it will show up on the pairing screen. You'll also be able to choose a name for your Flic.
6 - Completed
Your Duress™ Flic is now paired and can activate emergencies! You can view your connected Flics under Duress Devices > Duress Flic.
Make sure you exit the pairing screen before activating an emergency, as you can't activate emergencies if you're still in your settings, pairing screen or any other menu option.
Want to learn how to declare an emergency with your Flic? Click here
Disconnecting your Duress™ Flic
The Duress™ Flic can only be connected to one device at a time. If you are switching phones or giving the Flic to someone else to use, you may want to disconnect the Flic from your phone first.
1 - Open Pairing Screen
Open the Duress™ App and go to your Pairing Screen as explained above (Step 1 and 2).
2 - Disconnect
Tap the red ✖️ next to the Flic you'd like to disconnect. This will remove the Duress™ Flic from your paired devices.
Need Assistance?Our friendly support team are only a call or a click away. |